Dew point measurement from -20 to 50°Ctd. <b>New:</b> with Modbus-RTU interface.
In addition to the previously common 4...20 mA analogue output the new generation of dew point sensors have a digital RS 485 interface (Modbus-RTU). All values like e. g. dew point, temperature, absolute humidity ... which are measured and calculated by the dew point sensor can be retrieved via the Modbus protocol.
Compared with the previous models the sensorics and evaluation electronics have been improved once again, especially the integrated temperature compensation. This means: Increased accuracy at different ambient temperatures and an improved resolution of the sensor signal. Like the previous models the new dew point sensors have an excellent long-term stability and show reliable measured values. The sensor element is insensitive against condensation and due to the serial sintered cap made of stainless steel it is protected against direct contact with soiled particles.
Ideal instrument for dew point measuring for all kinds of dryers.
For residual moisture measurement after desiccant dryers/ membrane dryers from -80 to 20°Ctd. New: with Modbus-RTU interface.
with the digital process meter DS 52 and the dew point sensor FA 510 with a measuring range from -80 to 20°Ctd.
with the digital process meter DS 52 and the dew point sensor FA 510 with a measuring range from -20 to 50°Ctd.
for compressed air up to 16 bar
is screwed onto the dew point sensor and therefore enables an easy and low-priced possibility for on-site control and calibration down to -20°Ctd.