Standard measuring chamber
Standard measuring chamber for dew point measurement
When using the dew point sensors, it is always recommended to use a suitable measuring chamber. In this way, the sensor can be very easily inserted and removed from any compressed air line by means of a quick coupling. The advantages of using the measuring chamber are as follows:
- Since the sensor does not have to be unscrewed, it can be easily installed and removed under pressure
- Service and calibration work is possible without interrupting production.
- The pressure dew point is measured via the measuring chamber in the same way as for inline measurement, since the same pressure prevails in the measuring chamber as in the pipeline.
- An air flow of approx. 1l/min escapes via the copper capillary of the measuring chamber. This results in a forced flow and no "stagnant" air is measured. In addition, the reaction time is thus shortened.
- The measuring chamber isolates the sensor from the line. This prevents the sensor from being clogged by dirt in the compressed air, which may well be the case if it is installed directly in the line.
for compressed air up to 16 bar
Order no.: 0699 3390
- Residual moisture measurement in fuel gases
- Dew point measurement in compressed air systems
- Dew point measurement during the spray-painting process
- Dew point measurement in PET bottle production
- Dew point measurement after refrigerant dryer
- Dew point measurement / Dryer control of desiccant dryers
- Dew point monitoring in the pneumatic conveying of powder
- Mobile dew point measurement when servicing dryers
- Dew point on high-pressure systems and in respiratory air
- Dew point monitoring of thermal processing furnaces
- Dew point measurement for nitrogen or oxygen generators
- Moisture and oil measurement during wire drawing and cable production
- Dew point monitoring in the fruit and vegetable sector
- Dew point sensors for ozone generators
- Humidity and quality measurement when generating compressed breathing air
- Dew point monitoring in plastic granulate dryers
- Dew point monitoring of medical compressed air
DP 510 - Portable dew point meter with third-party sensor
Disposes all functions of our DP 500 and comes with an additional - freely assignable - sensor input.
DS 400 Set - Stationary dew point measurement in compressed air systems
Ideal for the monitoring of refrigeration or adsorption dryers.
FA 500 - Dew point sensor with integrated display and alarm relay
Ideal instrument for dew point measuring for all kinds of dryers.
FA 510/515 - Dew point sensor for adsorption dryers
For residual moisture measurement after desiccant dryers/ membrane dryers from -80 to 20°Ctd. New: with Modbus-RTU interface.