VA 520 - Thermal mass flow meter for flow measurement

Record and reduce your energy costs and increase your sustainability with the VA 520. Monitor your consumption and analyze your leakages with a permanently installed flow meter in distribution stations, in front of individual departments or for billing purposes of individual consumers.

Details

  • Measurement of mass flow rate, output of standard volume flow rate 
  • High accuracy for both small and large flows
  • Pressure and temperature compensated by the thermal mass flow principle 
  • Easy installation and removal of the sensor, the integrated measuring section can remain in the line for cleaning or recalibration of the sensor and can simply be closed with a sealing cap
  • No moving parts, therefore low maintenance
  • Vanishingly low pressure loss due to vanishingly low blockage of the diameter
  • Can be used for compressed air and non-corrosive gases such as nitrogen, oxygen, argon, helium, etc.
  • 04...20 mA, pulse and a Modbus RTU (RS 485) interface as standard, optional interfaces such as Modbus TCP (Ethernet), PoE, M-Bus 
  • Optional interfaces such as Modbus TCP (Ethernet), PoE, M-Bus 
  • Optional: Bi-directional measurement 
  • Pressure range up to 40 bar
  • Temperature range from -30 to 80°C
  • Protection class IP65
  • Integrated display to show the measured values 
  • Can be used from DN 8 to DN 80
  • Settings adjustable via the keys of the display 
  • Main counter reading can be reset via the display 
  • For velocities up to 224 Nm/s
  • Highly accurate with an accuracy of ± 1.5% or ± 1% of the measured value  -  as well as ± 0.3% of the final value

Similar products

VA 550 - Thermal mass flow sensor for flow measurement

Insertion type sensor for demanding industrial applications, with ATEX approval for Ex zones or DVGW approval for use in natural gas.

More

VA 570 - Thermal mass flow meter for consumption measurement

ATEX approval for hazardous areas and DVGW approval for use in natural gas.

More

VA 500 - Flow meter for compressed air and gases

RS 485 interface, Modbus RTU, 4...20 mA analogue output for m³/h, Pulse output for m³.

More

M-Bus - Industrial gas meter

State-of-the-art industrial gas meter with M-Bus for compressed air, natural gas, biogas and many other applications.

More

Accessories

Intelligent chart recorder DS 500 for compressed air and gases

Up to 12 optional sensors can be connected. 7" colour screen with touch panel.

More

Chart recorder - DS 400

3.5" graphic display with touch screen. Option integrated data logger. Up to 4 sensor inputs. Option Ethernet / RS 485 interface.

More

DS 52 - Digital process meter

in a shapely wall housing, suitable for all customary sensors with 0(4)...20 mA signal.

More