FA 510/515 - Dew point sensor for adsorption dryers

The proven FA 510 dew point sensor is now available with an IO-Link interface . The IO-Link interface enables easy integration of dew point measurement in front of machines and systems. Optionally available with integrated pressure sensors .

Monitoring a desiccant dryer is crucial for increasing energy efficiency, ensuring product quality, preventing damage to machinery, recognising maintenance needs and achieving cost savings. This contributes to the smooth functioning of compressed air systems in various industrial applications.

The sensor technology and evaluation electronics of our sensors have undergone continuous improvement. This implies an increased precision at varying ambient temperatures and a higher signal resolution of the sensor. Similar to their predecessor models, the new dew point sensors are characterised by long-lasting, stable and reliable measurement results. The sensor element is insensitive to condensation and is protected from direct contact with contaminated particles by the stainless steel sintered cap.

to the request
The product has been added to the request.
to the request

Details

  • Ideal for all types of desiccant dryers with a measuring range of -80...+20°Ctd.
  • Gas-independent measuring, also suitable for other, non-corrosive gases
  • Compact design, ideal for dryer installations
  • Robust design, protection class IP 66
  • Condensation-resistant sensor element
  • Long-term stability and drift-resistant, therefore optimised calibration intervals
  • Fast adaptation time, especially from dry to wet conditions
  • BSP, NPT or UNF thread
  • 4...20 mA analogue output (two- or three-wire technology) and Modbus RTU (RS 485) interface
  • Measured values available in various units, pressure dew point [°Ctd], temperature [°C], rel. humidity [%rh], abs. humidity [g/m³], degree of humidity [g/kg], humidity fraction V/V [ppmV/V], water vapour partial pressure [hPa], atmospheric dew point [°Ctd.atm].
  • On-site sensor diagnostics with handheld device or CS Service software

Related products

FA 500 - Dew point sensor with integrated display and alarm relay

Ideal instrument for dew point measuring for all kinds of dryers.

More

FA 510/515 - Dew point sensor for refrigeration dryers

for residual moisture measurement from -20 to 50°Ctd. With Modbus RTU interface.

More

Dew point measurement DS 52-set for desiccant dryers

with the digital process meter DS 52 and the dew point sensor FA 510 with a measuring range from -80 to 20°Ctd.

More

Dew point measurement DS 52-set for refrigeration dryers

with the digital process meter DS 52 and the dew point sensor FA 510 with a measuring range from -20 to 50°Ctd.

More

Accessories

Standard measuring chamber

for compressed air up to 16 bar

More

High-pressure measuring chamber up to 350 bar

for dew point measuring in high pressure systems such as diving applications, breathing protection for fire departments etc.

More

Measuring chamber for atmospheric dew point

especially for e.g. applications in the medical field

More

Measuring chamber for granulate dryers and gases

Applicable for -1...16 bar

More

Stainless steel Bypass measuring chamber up to 500 bar

for dew point measurement in gases (stainless steel 1.4305)

More

Stainless steel measuring chamber for compressed air up to 50 bar

for measuring the dew point in high-pressure systems with purity requirements (e.g. PET bottle production))

More

Control and calibration set for dew point sensors

is screwed onto the dew point sensor and therefore enables an easy and low-priced possibility for on-site control and calibration down to -20°Ctd.

More