VA 525 – Compact in-line volume flow sensor for compressed air and nitrogen
The newly developed VA 525 combines modern digital interfaces for connection to an energy monitoring system with a small, compact design. The VA 525 is used whenever a large number of machines (air-consuming equipment) need to be integrated into an energy monitoring network.
Reduce your energy costs and improve your sustainability with the VA 525 compact sensor. Monitor the consumption of individual machines and analyse your leakage currents using just one measuring device.
Measurement of mass flow rate. Direct output of standardised volume flow rate is possible without the need for additional pressure and temperature measurements.
Compact unit for installation in confined spaces; no inlet or outlet sections required thanks to the integrated flow straightener
Available with an integrated pressure sensor
Highly accurate at both low and high volume flows
No moving parts, therefore low-maintenance
Suitable for compressed air and nitrogen
04…20 mA and pulse or a Modbus RTU (RS-485) interface as standard
Optional interfaces such as Modbus TCP (Ethernet), Power over Ethernet (PoE) and M-Bus are available.
Pressure range up to 16 bar
Temperature range up to 60°C
Integrated display for showing measured values
Available from 1/4” to 2”
Settings can be selected using the keys on the display
The main totaliser reading can be reset via the display
For velocities up to 224 Nm/s
Highly accurate, with a measurement accuracy of ±1.5% or ±1% of the measured value – as well as ±0.3% of the upper range value
You can easily start another configuration for the product right here.
[[ 'Your product is %xx% % configured'.replace('%xx%', progressPercentage.toFixed(0)) ]]
Accessories
DS 500 – Energy analysis for gas and compressed air systems
Chart recorders for stationary energy analysis: versions with 4, 8 or 12 sensor inputs and an integrated sensor power supply. Displays and analyses consumption, power and operating conditions simultaneously.
DS 400 – Leak calculation for compressed air and gas
For the on-site display and monitoring of connected sensors in compressed air and gas networks. Data loggers, additional inputs and network connectivity are optional.