Dew point sensor FA 515 Ex

measures the Dew point or Pressure dew point in potentially explosive areas and can be used in many non-aggressive Gases.

Typical areas of application: Compressed air, Argon, Nitrogen, Biogas, Natural gas, Hydrogen, etc.

Our Dew point sensor FA 515 Ex fulfils the following industry approvals:

  • ATEX II 2 G Ex ib IIC T4 Gb Zone 1, Gases, Intrinsically safe, Temp. 135 °C
  • ATEX II 2 D Ex ib IIIC T80°C Db Zone 21, dust, intrinsically safe, temp. 80 °C

Please note: The FA 515 Ex may only be operated in conjunction with approved transmitter power supply units or safety barriers or galvanic isolating elements with max:

  • Ui = 28 V max.
  • Ii = 95 mA max.
  • Pi = 0.65 W max.

Details

  • Robust design
  • Pressure-resistant up to 500 bar
  • Long-term stable humidity sensor, proven for years
  • 4...20 mA Analogue output in 2-wire technology
  • Additional Measured values adjustable via Software: % rH, g/m³, mg/m³, Ppm V/V, g/kg
  • Explosion protection according to ATEX / safety in hazardous areas
  • NEW: Higher resolution of the Sensor signal thanks to improved evaluation electronics

Similar products

FA 500 - Dew point sensor with integrated display and alarm relay

Ideal instrument for dew point measuring for all kinds of dryers.

More

FA 510/515 - Dew point sensor for adsorption dryers

For residual moisture measurement after desiccant dryers/ membrane dryers from -80 to 20°Ctd. New: with Modbus-RTU interface.

More

FA 510/515 - Dew point sensor for refrigeration dryers

Dew point measurement from -20 to 50°Ctd. New: with Modbus-RTU interface.

More