VA 520 – Thermal mass flow meter for flow measurement

Track and reduce your energy costs and improve your sustainability with the VA 520. Monitor your consumption and analyse leaks using a permanently installed flow meter in distribution stations, upstream of individual departments, or for the purpose of billing individual consumers.

to the request
The product has been added to the request.
to the request

Do you have specific requirements?
Select the appropriate attributes in our configurator and receive a customized quote for your request.

Configure product

Details

  • Measurement of mass flow rate, direct output of standardised volume flow rate
  • Highly accurate for both low and high volume flows
  • Pressure- and temperature-compensated using the thermal mass flow principle 
  • Easy installation and removal of the sensor; the integrated measuring section can remain in the pipe for cleaning or recalibration of the sensor and can simply be sealed with a sealing cap
  • No moving parts, therefore low maintenance
  • Negligible pressure drop due to negligible obstruction of the diameter
  • Suitable for compressed air and non-corrosive gases such as nitrogen, oxygen, argon, helium and many more
     
  • 04…20 mA, pulse and a Modbus RTU (RS-485) interface as standard; optional interfaces such as Modbus TCP (Ethernet), Power over Ethernet, M-Bus 
  • Optional: Bidirectional measurement 
  • Pressure range up to 40 bar
  • Temperature range from -30 to 80°C
  • Protection class IP65
  • Integrated display for showing measured values 
  • Suitable for use with nominal diameters from 8 to 80 mm
  • Settings can be adjusted using the keys on the display 
  • The main totaliser reading can be reset via the display 
  • For velocities up to 224 Nm/s
  • Highly accurate, with a measurement accuracy of ± 1.5% or ± 1% of the measured value, and ± 0.3% of the upper range value

Product configurator

You can easily create one or more configurations for this product. 

When you add the product to the inquiry, all of your configurations will be automatically included in the inquiry.

Your current configuration

[[ error ]]

Select a variant

[[ completedSteps ]] / [[ totalSteps ]]
  1. [[ step.txt ]]

You have successfully completed your configuration.
Add it to your request now.

You have successfully completed your configuration.
You can now easily request it directly.

to the request

Not sure which option is right for you? Our experts will be happy to help.
Add the product, including all configurations, directly to your request. 

Not sure which option is right for you? Our experts will be happy to help.
Request the product — including all configurations — now.

to the request
[[ 'Your product is %xx% % configured'.replace('%xx%', progressPercentage.toFixed(0)) ]]

Related products

VA 550 - Thermal mass flow sensor for flow measurement

Robust thermal insertion flow meter for compressed air, industrial gases and fuel gases such as natural gas. Cleanable stainless steel sensor tip and aluminium housing. Pressure ratings up to 50 bar; special version up to 100 bar. Integrated pressure measurement and ATEX/IECEx or DVGW versions available as options.

More

VA 570 - Thermal mass flow sensor for flow measurement

Robust thermal flow meter with a cleanable stainless steel sensor tip and integrated measuring section for stationary consumption measurement. Suitable for compressed air, industrial gases and fuel gases such as natural gas. Integrated pressure measurement and ATEX/IECEx or DVGW versions available as options.

More

VA 500 – Flow meter for compressed air and gases

Insertion flow meters for existing pipework: nominal diameters 15 to 1000 mm, depending on shaft length; larger diameters available on request. Pressure-rated versions up to 50 bar. Installation and removal under pressure via a ½-inch ball valve, either stationary or mobile. Integrated pressure measurement available as an option.

More

M-Bus compressed air and gas meters

For internal consumption allocation and remote read-out of meters via M-Bus. Choose between thermal insertion type sensors and devices with an integrated measuring section, depending on the point of measurement.

More

Accessories

DS 500 – Energy analysis for gas and compressed air systems

Chart recorders for stationary energy analysis: versions with 4, 8 or 12 sensor inputs and an integrated sensor power supply. Displays and analyses consumption, power and operating conditions simultaneously.

More

DS 400 – Leak calculation for compressed air and gas

For the on-site display and monitoring of connected sensors in compressed air and gas networks. Data loggers, additional inputs and network connectivity are optional.

More

DS 52 - Digital process meter

in a shapely wall housing, suitable for all customary sensors with 0(4)...20 mA signal.

More