Intelligent chart recorder DS 500 for compressed air and gases
Up to 12 optional sensors can be connected. 7" colour screen with touch panel.
Details
- Measurement of mass flow. Direct output of standarized volume flow is possible without the need for additional pressure and temperature measurements.
- Compact unit for installation in confined spaces; no inlet or outlet straightening sections required thanks to the integrated flow straightener
- Highly accurate for both low and high flows
- Easy installation and removal of the sensor. The integrated measuring section can remain in the pipe whilst the sensor is being cleaned and can simply be sealed with a cap.
- No moving parts, therefore low maintenance
- Suitable for compressed air and non-corrosive gases such as nitrogen, oxygen, argon, helium and many more
- 04…20 mA, pulse and a Modbus RTU (RS 485) interface as standard
- Optional interfaces such as Modbus TCP (Ethernet), Power over Ethernet, M-Bus
- Pressure range up to 40 bar
- Temperature range up to 80°C
- Integrated display for showing measured values
- Available in sizes from ½" to 2"
- Settings can be selected using the keys on the display
- The main counter reading can be reset via the display
- For velocities up to 224 Nm/s
- Highly accurate, with an accuracy of ± 1.5% or ± 1% of the measured value – as well as ± 0.3% of the upper range value
Product configurator
Please select from the options provided
[[ error ]]
[[ completedSteps ]] / [[ totalSteps ]]
-
[[ step.txt ]]
You have successfully completed your configuration.
Add it to your request now.
You have successfully completed your configuration.
Add it to your request now.
[[ 'Your product is %xx% % configured'.replace('%xx%', progressPercentage.toFixed(0)) ]]
