The measuring range of -80...20°Ctd makes the dew point set DS 52 with alarm the ideal dew point monitor with analogue output 4...20 mA.
The dew point sensor FA 410 is extremely long-term stable and can be installed and removed quickly and easily under pressure by means of the screwable measuring chamber including quick coupling. The dew point set is supplied ready for plug-in, i.e. everything is completely wired. The alarm values can be freely adjusted.
Ideal instrument for dew point measuring for all kinds of dryers.
For residual moisture measurement after desiccant dryers/ membrane dryers from -80 to 20°Ctd. New: with Modbus-RTU interface.
with the digital process meter DS 52 and the dew point sensor FA 510 with a measuring range from -80 to 20°Ctd.
with the digital process meter DS 52 and the dew point sensor FA 510 with a measuring range from -20 to 50°Ctd.
for compressed air up to 16 bar
is screwed onto the dew point sensor and therefore enables an easy and low-priced possibility for on-site control and calibration down to -20°Ctd.
CS INSTRUMENTS GmbH & Co. KG
Zindelsteiner Straße 15
D-78052 VS-Tannheim
P: +49 7705 978 99 0
F: +49 7705 978 99 20
E: info@cs-instruments.com
CS INSTRUMENTS GmbH & Co. KG
Am Oxer 28c
D-24955 Harrislee
P: +49 461 80 71 50 - 0
F: +49 461 80 71 50 - 15
E: info@cs-instruments.com
CS INSTRUMENTS GmbH & Co. KG
Zindelsteiner Straße 15
D-78052 VS-Tannheim
P: +49 7705 978 99 0
F: +49 7705 978 99 20
E: info@cs-instruments.com
Dew Point
Flow Meter
Leak Detection
Pressure Sensors
Compressed Air Quality
Chart Recorder
Software
Power Meter