Software

CS Basic (2018) - 0554 8040

Data evaluation in graphical and tabular form - Readout of measurement data via USB stick or Ethernet. Licence for 2 workstations.

OS: Win7x64 or higher, Mac

Supported devices: DS 500, DS 500 mobile, DS 400, DS 400 mobile, DP 500, DP 510, PI 500, LD 510

CS Leak Reporter V1 - for LD 500/510

Provides an illustrated overview of the Leakages found and their savings potential. Corrective measures including status display can be defined for each Leak.

OS: Win7x64 or higher, Mac

Supported devices: LD 500/510

CS Leak Reporter V2 (current version) - for LD 500/510

Provides an illustrated overview of the Leakages found and their savings potential. Corrective measures including status display can be defined for each Leak.

OS: Win7x64 or higher, Mac, 16 GB RAM

Supported devices: LD 500/510

CS Leak Reporter Cloud solution - for LD 500/510

The CS Leak Reporter Cloud solution combines the functionalities of the CS Leak Reporter V2 with a browser-based cloud system.

  1. Register an account with your email address
  2. Activate a purchased licence or the trial licence (30 days)
  3. Use the Software

OS: no installation required, access via www.leak-reporter.com

Supported devices: LD 500/510

CS Network - Energy Monitoring System

Software for recording and analysing data of various Measured values.

CS Soft Network can be used to analyse any number of sensors and Data loggers via Ethernet. The Software stores the measurement data of all integrated devices in a MySQL database on the server. The measurement data can be analysed from any PC within the company using the client software.

CS Network initial installation:

Server:

Client:

CS Network Update:

Update instructions

CS Soft Basic - 0554 7040

The CS Basic software is used to read out the measurement data via Ethernet or USB stick and enables the customer to analyse the measurement data graphically or in tabular form. Statistical analyses and a consumption analysis round off the functions. The measurement data can be exported as a pdf file or Excel ® file. The CS Soft Energy Analyzer add-on module is used to analyse the load/idle times of Compressors. At the touch of a button, the user receives important data such as electricity costs, compressed air costs, leakage costs in euros, compressor data with load/idle times, specific output in kWh/m³, costs of Compressed air in euros per m³. Once downloaded, the Software can be used for a maximum of 10 days without a licence key. After 10 days, the Software must be registered by entering a licence key (subject to a charge).

OS: Windows 2000, XP, Windows 7/8/10

Version: 2.0.0.44

Supported devices: DS 500, DS 500 mobile, DS 400, DS 400 mobile, DP 500, DP 510, PI 500

*** Attention file must be unpacked before opening ***

CS Soft Basic example file

To use the CS Soft Basic demo file, follow these steps:

  • After downloading and unpacking the demo file, please start the Software
  • Select the "from file" option in the "Read out from Datalogger" menu
  • Now navigate to the folder in which you have unpacked the file and select the "Example file CS Soft Basic.sql".
  • To display the data, click on "open" and then select the "test_xx" file
CS Soft Network

With the CS Soft Network, any number of DS 500 / DS 400 can be analysed via Ethernet. The Software saves the measurement data of all DS 500 / DS 400 in the network cyclically in an SQL database on the server. The measurement data can be analysed by several users simultaneously. The measurement data can be analysed graphically and in tabular form. An automatic consumption analysis enables the costs and individual consumptions of each individual department to be allocated. Alarm messages are sent automatically by SMS or e-mail if limit values are exceeded.

OS: Windows 2000, XP, Windows 7/8/10

Version: 1.2.5.4

Supported devices: DS 500, DS 400, DS 300

Firmware (device software) for DS 500

ATTENTION for firmware updates from versions prior to V4.30, please update twice!

Use this firmware (device software) to update your DS 500 to the latest version. Simply download the file, save it to a USB stick, unzip it and then carry out the update in the System Update menu on the DS 500. Please ensure that the DEV0001 and DEV0005 folders are in the root directory of the USB stick.

DS500 version: 4.36 (DEV0001)

DS500V2 Version : 5.66 (DEV0005)

For the devices: DS 500, DS 500 mobile

Firmware (device software) for DS 400

ATTENTION for firmware updates from versions prior to V3.30, please update twice!

Use this firmware (device software) to update your DS 400 to the latest version. Simply download the file, save it to a USB stick, unzip it and then carry out the update in the System Update menu on the DS 400. Please ensure that the DEV0002/DEV0021 folder is in the root directory of the USB stick.

DS400version: 3.49 (DEV0002)

DS400V2 Version: 4.07 (DEV0021)

For the devices: DS 400, DS 400 mobile

Firmware (device software) for DP 500 / DP 510 / PI 500

With this firmware (device software) you can update your DP 500 / DP 510 / PI 500 to the latest version. Simply download the file, save it on the USB stick, unzip it and then execute the update in the System update menu of the DP 500 / DP 510 / PI 500. Please ensure that the DEV0003/DEV0006 folder is located in the root directory of the USB stick.

DP500/DP510/PI500 V1 Version: 3.45 (DEV0003)

DP500/DP510/PI500 V2 Version: 5.18 (DEV0006)

For the devices: DP500, DP510, PI500

Service Software for VA 5xx Consumption sensors

The CS Service Software (article no. 0554 2007) can be used in conjunction with the interface adapter to access the digital interface (Modbus RTU) of the Consumption sensors from CS INSTRUMENTS directly from the PC via the USB interface. The service software enables the user to scale the 4...20 mA Analogue output, change the units and much more...

Version: 1.0.1.48

For the devices: VA 500, VA 520, VA 550, VA , VX 570, VU 570

Firmware sensors VD 500

This firmware (software in the sensor) brings your VD 500 up to date. Simply download the file and import it into the sensor using the Service Software.

Version: 1.73

For the devices: VD 500

Firmware sensors VA 525

This firmware (software in the sensor) brings your VA 525 up to date. Simply download the file and import it into the sensor using the Service Software.

Version: 1.73

For the devices: VA 525

Firmware sensors VA 500 / 520

This firmware (software in the sensor) brings your VA 500/ VA 520 up to date. Simply download the file and import it into the sensor using the Service Software.

Version: 1.73

For VA 500/ VA 520 devices up to HW version lower than V3.00:

Firmware sensors VA 500 / 520

This firmware (software in the sensor) brings your VA 500/ VA 520 up to date. Simply download the file and import it into the sensor using the Service Software.

Version: 1.73

For VA 500/ VA 520 devices from HW V3.00:

Firmware sensors VA 550 / VA 570

This firmware (software in the sensor) brings your VA 550/ VA 570 up to date. Simply download the file and import it into the sensor using the Service Software.

Version: 1.73

For VA 550/ VA570 devices up to HW version lower than V2.00:

Firmware sensors VA 550 / VA 570

This firmware (software in the sensor) brings your VA 550/ VA 570 up to date. Simply download the file and import it into the sensor using the Service Software.

Version: 1.73

For VA 550/ VA570 devices from HW V2.00:

Firmware sensors VU 570

This firmware (software in the sensor) brings your VU 570 up to date. Simply download the file and import it into the sensor using the Service Software.

Version: 1.73

For the devices: VU 570

Firmware sensors VX 570

This firmware (software in the sensor) brings your VX 570 up to date. Simply download the file and import it into the sensor using the Service Software.

Version: 1.73

For the devices: VX 570

Service Software for FA 5xx Dew point sensors

The CS Service Software (article no. 0554 2007) can be used in conjunction with the interface adapter to access the digital interface (Modbus RTU) of the Dew point sensors from CS INSTRUMENTS directly from the PC via the USB interface. The service software enables the user to scale the 4...20 mA Analogue output, change the units and much more...

Version: 1.0.8.0.

For the devices: FA 510, FA 515, FA 500

Firmware sensors FA 510

This firmware (software in the sensor) brings your FA 510 up to date. Simply download the file and import it into the sensor using the Service Software.

Version: 1.98

For the devices: FA 510

Firmware sensors FA 515

This firmware (software in the sensor) brings your FA 515 up to date. Simply download the file and import it into the sensor using the Service Software.

Version: 1.98

For the devices: FA 515

Firmware sensors FA 500

This firmware (software in the sensor) brings your FA 500 up to date. Simply download the file and import it into the sensor using the Service Software.

Version: 1.34

For the devices: FA 500

Firmware sensors FA 550

This firmware (software in the sensor) brings your FA 550 up to date. Simply download the file and import it into the sensor using the Service Software.

Version: 1.34

For the devices: FA 550

CS Service Software - for older sensors

The CS Service Software (article no. 0554 2005) can be used in conjunction with the IF 100 interface adapter to access the digital interface (SDI) of the Dew point and volumetric flow sensors from CS INSTRUMENTS directly from a PC via a USB interface. The service software allows the user to scale the 4...20 mA Analogue output, change the units, etc.

Version: 4.70

Supported devices: FA 300, FA 400, FA 410, FA 415, VA 300, VA 400, VA 420

Firmware (device software) for LD 500 / LD 510

Use this firmware (device software) to update your LD 500 / LD 510 to the latest version. Simply download the file, save it to the USB stick, unzip it and then carry out the update in the LD 500/510's System Update menu. Please ensure that the DEV0004 folder is located in the root directory of the USB stick.

Version: 5.18

For the devices: LD 500, LD 510

Firmware (device software) for LD 450

Use this firmware (device software) to update your LD 450 to the latest version. Simply download the file, save it to the USB stick, unzip it and then carry out the update in the LD 450's System update menu. Please ensure that the DEV0004 folder is in the root directory of the USB stick.

Version: 4.08

For the devices: LD 450

USB driver for interface adapter IF 100 of the CS Service Software

Operating system: Windows 2000, XP, Windows 7 (32-bit)

Version: 1.00

USB driver for interface adapter IF 100 (from hardware V 2.0) of the CS Service Software

Operating system: Windows 2000, XP, Windows 7 / 8

Version: 2.06.00

Flow computer

Use the flow rate calculator to determine the flow rate, the flow quantity in relation to the inner pipe diameter and find the suitable sensor for your applications

OS: Windows 2000, XP, Windows 7/8 /10

Moisture calculation

The program is used for Calculation of various humidity variables such as Pressure dew point, Absolute humidity, Relative humidity, Water vapour partial pressure etc.

OS: Windows 2000, XP, Windows 7/8