High-pressure protection
High-pressure protection

High-pressure protection

The supplementary device "high-pressure protection" serves for a safe installation and fastening of the CS sensors VA 5xx under pressure. It is strongly recommended to be used for gas or air pressures from 10 bar.

  • Set up measuring site with screw neck (G 1/2" outer diameter) according to the mounting instruction of the sensor VA 500
  • Screw on the high pressure rig pressure-tightly and make sure that the ball valve can be opened and closed
  • Close ball valve before mounting the sensor

Details

  • Set up the measuring site with pipe connection (R 1/2 male thread) according to the specifications in the installation instructions for the VA 500 sensor
  • Screw on the High-pressure protection pressure-tight and align it so that the Ball valve can be operated by hand
  • Close the Ball valve before installing the sensor