Dew point monitoring for medical compressed air
Dew point monitoring for medical compressed air

Dew point set DS 400 for monitoring of medical compressed air

Compared to DIN EN 737-3 the monograph “Aer medicalis” in the appendix to the European Pharmacopoeia includes essentially altered purity features whereas especially the drastically reduction of the dew point temperature to -46°C atmospheric (this corresponds to 67 ppm V/V) leads to considerable difficulties. The value 67 ppm V/V for water equals the point of condensation at a pressure of 200 bars and a temperature of 11 ºC. This limitation of the water content to the point of condensation is necessary since the condensation of water may cause corrosion damages and furthermore can favor the increase of microbes.

Details

  • Chart recorder DS 400
  • Dew point sensor FA 510
  • Standard measuring chamber
  • Pressure sensor CS 10

Similar products

Stationary dew point measurement in compressed air systems with DS 400 - dew point set

DS 400 Set - Stationary dew point measurement in compressed air systems

Ideal for the monitoring of refrigeration or adsorption dryers.

More
The dew point sensors FA510/515 for the typical use in refrigeration dryers

FA 510/515 - Dew point sensor for adsorption dryers

For residual moisture measurement after desiccant dryers/ membrane dryers from -80 to 20°Ctd. New: with Modbus-RTU interface.

More
Standard measuring chamber for compressed air up to 16 bar

Standard measuring chamber

for compressed air up to 16 bar

More

Standard pressure sensor CS 10 and CS 16

for measurements from 0...10 and 0...16 bar with accuracy of full scale max. 1% or max. 0,5%.

More